High Quality Diesel Fuel Injection System Pump Head Rotor 0000000068 0 000 000 068 Injection Pump Elements
products description
| Reference. Codes | 0 000 000 068 |
| Application | / |
| MOQ | 2PCS |
| Certification | ISO9001 |
| Place of Origin | China |
| Packaging | Neutral packing |
| Quality Control | 100% tested before shipment |
| Lead time | 7~15 working days |
| Payment | T/T, L/C, Paypal, Western Union or as your requirement |
Operation of diesel pump head
1. Preparation: Before operating the diesel pump head, you need to check the relevant parts of the diesel engine, including the fuel tank, fuel inlet pipeline, filter, fuel injector, etc., to ensure that they are all in good working condition. At the same time, you also need to check whether the power cord, switch, plug, etc. of the diesel pump head are intact to prevent the pump head from failing to work properly due to electrical failure.
2. Start the diesel pump head: Before starting the diesel pump head, you need to ensure that the engine has started and is running stably. Then, according to the instructions of the diesel pump head, connect the pump head to the power supply and turn on the pump switch. At this time, you can hear the sound of the gears or other boosting mechanisms inside the pump head running.
3. Check the fuel supply: After the diesel pump head is started, it is necessary to observe whether the fuel supply is normal. The working status of the pump head can be judged by observing the injection amount and injection time of the injector. If the injection amount is found to be too large or too small, or the injection time is inaccurate, it is necessary to adjust the relevant parameters of the pump head in time or troubleshoot.
4. Operation monitoring: During the operation of the diesel engine, it is necessary to continuously monitor the working status of the diesel pump head. You can monitor the pressure of the pump head by observing the pressure gauge and other equipment to ensure that it is within the normal range. At the same time, you also need to pay attention to the vibration and noise of the pump head. If there is any abnormality, you should stop the machine immediately for inspection.
5. Stop the diesel pump head: When you need to stop the diesel pump head, you need to turn off the fuel supply of the engine first, then press the stop button of the pump head or cut off the power supply. After stopping, you need to clean the pump head and the surrounding environment to prevent residual oil stains or other impurities from damaging the pump head.
